Puros Y Vino Posted December 28, 2012 Share Posted December 28, 2012 I've been "experimenting" with jars over the past year as I've found them to be an excellent way to store and possibly age cigars. Ever since I picked up my first jar, the LGC Deliciosos I couldn't get over how beautiful it was and how great a job it did in terms of maintaining RH. And the aroma's intensity when you open it! So, I've tried to replicate what that jar does in terms of function. Below are some examples. First off. I'm a big fan of HU Magnum 50's. I've had two 25 cabs and I'm down to about 23 cigars. I've smoked so many that I reserved myself to aging and sampling them over time. So I hunted down an acrylic jar. I had to wash and scrub the hell out of it to get rid of the "plastic" smell. The end result. The first photo is the sealed jar with a circular cedar cutout from the cabinet insert. It maintains a steady 65 RH even without humidifcation. Here's a shot of it open with some added detail. There's about 22 cigars in there. My next project was to fill in some Siglo VI Jars I purchased on Ebay. The one on the right contains 25 2012 stock. The one on the right contains 25 2004 stock. Here's a top view of the two jars. I've wrapped one stick from each jar in wax paper to make stuffing it easier. It was incredibly hard and tedious to fill these to their spec capacity. But, in the end it worked out. Next up Hamlet Lanceros Jar. This one is acrylic as well. I picked up a whole bunch while in Havana. There's room for a lot more. Here's a closeup. Still on Hamlet's custom rolls. I present to you his "Flying Pigs". These are a real treat. Three hours to smoke, not a boring third to be found. A closeup. These are big, odd shaped cigars. You'll notice they don't stand up straight in the jar. There's 12 in there. I don't think any more would fit. My most recent project is a BHK jar. I tried something new. I found a glass jar that was appropriate to house BHK52's or 45's comfortably. I don't have enough to fit the jar but I hope to change that over time. I had to modify this jar. Every other jar I have came with a silicon ring to heal seal the contents. This one did not. I found some non odor kitchen/bath clear silicon and applied it to the lid and let it cure for a few days. No odor is present. And to top it off. It seals very tight. This jar would probably be a good bet for long term aging. My final jar is empty. I just picked this up a week ago. I've washed it out so there's is no odor in it. It looks like it will fit a cigar as long as a 1966. I might take this one apart and make a nice, slick black BHK jar for the 54's I have. I'll have to do some research into what paints to use as this one is properly painted and glazed. The seal on this jar is air tight. Another excellent candidate for long term storage. And that's it. I hope you enjoyed my tour into jar madness. Here's a bonus shot. Sadly, only one of these is mine. Link to comment Share on other sites More sharing options...
Duxnutz Posted December 28, 2012 Share Posted December 28, 2012 Looks great! The limited exposure I have to jars I had a problem with overhumidification and mould. I guess having them at least half full would work better. Link to comment Share on other sites More sharing options...
mk05 Posted December 28, 2012 Share Posted December 28, 2012 Jarhead Link to comment Share on other sites More sharing options...
Puros Y Vino Posted December 28, 2012 Author Share Posted December 28, 2012 Very, very cool! Why use acrylic though? Are there no porcelaine or glass ones out there that can be used just as easily? That LGC jar is one of the glaring mistakes in my collection over time. I usually make teh right choice, but I opted for the Noellas instead at the time, and boy oh boy was that a mistake!! Keep us updated. This is excellent!! Thanks Shlomo. I chose the acrylic ones because they were not tapered at the top. They sides ran 90degrees to the base which is ideal. All the glass/porcelain ones I came across were wide bodied with a small opening. As for the LGC jar. I lucked out. My first choice was P1 jar. I'm so glad I changed my mind at the last second. It's a real beauty. Link to comment Share on other sites More sharing options...
Puros Y Vino Posted December 28, 2012 Author Share Posted December 28, 2012 One other question, how is the BHK jar sealed? Is it as tight as the others? I coated the edge of the lid in transparent silicon sealant. It has no odor. And it is very airtight. I have to wrestle to get it open. Even though I only applied the gel to the lid it really adheres to the mouth of the jar. The temp/RH readings you see on the Hygrometer have been that way for about two weeks. Link to comment Share on other sites More sharing options...
dpodiluk Posted December 28, 2012 Share Posted December 28, 2012 Nice work! I just picked one of those ciglo jars for christmas, now i just gotta find a way to fill it Link to comment Share on other sites More sharing options...
BonVivant Posted December 28, 2012 Share Posted December 28, 2012 Brilliant topic! Been experimenting with jars for quiet a while, albeit only glass and porcelain ones. BTW, Portmann's 40th holds 20 BHK54 comfortably. Link to comment Share on other sites More sharing options...
AlohaStyle Posted December 28, 2012 Share Posted December 28, 2012 Frank, do you simply keep your jars out in the open, or in another humidor? I'm assuming just left out in a room huh? I only have a couple jars but don't trust leaving them out enough... figure if I paid for an Aristocrat, I might as well use it!?! LOL But on the other hand, jars do look purdy! Link to comment Share on other sites More sharing options...
OZCUBAN Posted December 28, 2012 Share Posted December 28, 2012 Grat stuff frank Link to comment Share on other sites More sharing options...
Puros Y Vino Posted December 28, 2012 Author Share Posted December 28, 2012 Frank, do you simply keep your jars out in the open, or in another humidor? I'm assuming just left out in a room huh? I only have a couple jars but don't trust leaving them out enough... figure if I paid for an Aristocrat, I might as well use it!?! LOL But on the other hand, jars do look purdy! Out in the open. I don't have no fancy Aristocrat! They work well in terms of maintaining RH. Link to comment Share on other sites More sharing options...
ebhead Posted December 28, 2012 Share Posted December 28, 2012 I still think you should have picked up some of the "limited" edition Guant jars (aluminum tins) when we were in Havana!!!! Link to comment Share on other sites More sharing options...
riazp Posted December 28, 2012 Share Posted December 28, 2012 Very intersting stuff Frank! Link to comment Share on other sites More sharing options...
Pilgrims Posted December 28, 2012 Share Posted December 28, 2012 Great topic. I have bought a few jars to do this with. I am thinking also that a jar may be the best way for me to store a few smokes at work. Link to comment Share on other sites More sharing options...
Colt45 Posted December 28, 2012 Share Posted December 28, 2012 Good stuff! Link to comment Share on other sites More sharing options...
Mr.T Posted December 28, 2012 Share Posted December 28, 2012 Great work. Look forward to hearing how the experiment goes..... Link to comment Share on other sites More sharing options...
Strada Posted December 28, 2012 Share Posted December 28, 2012 Frank, awesome study, post the result I am more than interested...I love the way jar looks as well Link to comment Share on other sites More sharing options...
CanuckSARTech Posted January 1, 2013 Share Posted January 1, 2013 I still think you should have picked up some of the "limited" edition Guant jars (aluminum tins) when we were in Havana!!!! LOL. There were only dozens and dozens and dozens of those on the shelves when we were there. They should double or triple the value in NO TIME!!!!! LOL. Link to comment Share on other sites More sharing options...
Squarehead Posted January 2, 2013 Share Posted January 2, 2013 Looks damn good Frank. Link to comment Share on other sites More sharing options...
Fuzz Posted January 2, 2013 Share Posted January 2, 2013 Great work, Frank! I can imagine a shelf cabinet full of jars, all perfectly sealed in their own little micro-climate... Link to comment Share on other sites More sharing options...
tdlfoto Posted January 2, 2013 Share Posted January 2, 2013 nice work Frank! Link to comment Share on other sites More sharing options...
Smokntaz Posted March 22, 2013 Share Posted March 22, 2013 What a cool idea! Now you got me thinking... Link to comment Share on other sites More sharing options...
canadianbeaver Posted March 22, 2013 Share Posted March 22, 2013 Well done!! Link to comment Share on other sites More sharing options...
Rye Posted March 24, 2013 Share Posted March 24, 2013 I coated the edge of the lid in transparent silicon sealant. It has no odor. And it is very airtight. I have to wrestle to get it open. Even though I only applied the gel to the lid it really adheres to the mouth of the jar. The temp/RH readings you see on the Hygrometer have been that way for about two weeks. I made some humidifiers out of my old SigloII tubos and they work great! I removed the cedar lining from the tubo, drilled 1/8" holes (I put them all in the back for aesthetics) cleaned all the sharp, loose metal. Smoothed the edges. Re-inserted the cedar, and filled with moistened beads, and popped the cap back on, and POOF! Works like a charm, and costs less than peanuts! Link to comment Share on other sites More sharing options...
polarbear Posted March 24, 2013 Share Posted March 24, 2013 Awesome work guys. I like the idea for the cigar tubes I recently picked up a Tatuaje Black, LGC, P1 and Noella jar and am finding myself searching for more. I'm not really sure why but I do find they are nicer to look at when I open my wineador. Is there any benefit to storing cigars in jars as opposed to boxes past the asthetics of them? Link to comment Share on other sites More sharing options...
dpodiluk Posted March 24, 2013 Share Posted March 24, 2013 I love the idea too, but I could not bring myself to deface those tubos like that Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now